2/22/2023 0 Comments Kinetex core shellHowever, because the core-shell particle diameter is 2.6 μm, the backpressures generated are more comparable to those of columns packed with 3 μm fully porous particles. The improved dynamics of analyte movement through these columns results in higher effective peak capacities and separation efficiencies comparable to those of fully porous 1.7 μm particles. These core-shell particles also have exceptionally consistent shape and size, which helps to improve separation efficiency by reducing the variability in analyte movement between particles. A 2.6 μm Kinetex core-shell particle has a non-porous core approximately 1.9 μm in diameter and an outer porous layer of 0.35 μm. The high separation efficiency of core-shell particles is due in large part to faster analyte mass transfer from the mobile phase into and out of the stationary phase because only the outer porous layer of the particle allows diffusion. The column charts (right) show the effect of HPLC system optimization on the separation efficiency observed with Kinetex compared to 5 μm fully porous particle columns and how those values compare to 1.7 μm fully porous columns used with UHPLC systems. These adjustments, which include increasing detector scan rates and reducing system dwell volume require little to no additional investment. However, investigations have shown that straightforward adjustments can be made to existing HPLC systems to significantly increase performance with core-shell columns. UHPLC systems have been engineered with sub-2 particle, high-pressure applications in mind, resulting in complex pump redesigns that add significantly to system cost. The chromatograms shown in the figure demonstrate the potential of Kinetex HPLC columns to reduce analysis time, compared to traditional 5 μm fully porous particles, without compromising analyte resolution or generating extreme backpressures. Coreshell particles can be used with high mobile phase flow rates to further reduce analysis time without significant losses in separation efficiency, whereas the performance of fully porous particles begins to drop off sharply at high flow rates. Solution: Kinetex™ core-shell HPLC particle technologies provide a high-efficiency, low-pressure solution for laboratories looking to increase productivity and decrease costs without investing in a UHPLC system. Unfortunately, columns packed with sub-2 μm particles typically generate pressures that exceed the limits of standard HPLC instruments and require the use of ultra-high pressure HPLC systems, which can be cost-prohibitive. Significant improvements have been made in the preparation of sub-2 μm HPLC packing materials, which provide high-efficiency separations in less time when packed in shorter columns. This can be accomplished in part by leveraging higher efficiency HPLC columns to increase analysis speed. Problem: Chromatographers have an ongoing need to increase productivity and decrease costs.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |