2/27/2023 0 Comments Burn not working mac os 10.14![]() If you post the magical string(s) that solves this issue, I will send you $200 USD (e.g. I will try any and all avrdude commands posted here. The hardware is known-working in Windows 7 & 10, as well as Mac OS 10.13 & 10.14.ģ: Solution must load firmware onto a 32M1 microcontroller with the following hardware setup: USB16U2(Uno)328p(Uno)32M1(shield). This reward is payable upon meeting the following conditions:ġ: Must resolve the issue in software. I am offering a $200 (USD) reward to the first person to solve the issue outlined above. because we have ~QTY30,000 units deployed in the field, so not a practical solution. "Have I tried adding a 10 uF capacitor?" In short, no. My guess is this is a timing issue that's caused by the OS itself. in fact, several people at my company have tried this on their dev hardware/machines with identical results. I've tried this with multiple different computers, multiple different hardware setups, etc. Everything else is the same (hardware, avrdude, config file, ArduinoAsISP, etc). The only difference is the operating system. Stk500_getparm(): (a) protocol error, expect=0x14, resp=0x10 Stk500_getparm(): (a) protocol error, expect=0x14, resp=0x02 Stk500_getparm(): (a) protocol error, expect=0x10, resp=0x14 Mac OS 10.13 & 10.14, and Windows 7 & 10:Īvrdude fails to upload the firmware, returning (in summary): Here are the commands I run on each OS version:Īvrdude -v -p atmega328p -b 115200 -c arduino -P /dev/cu.usbmodem1311 -D -Uflash:w:"/Volumes/RAM Disk/ArduinoAsISP.hex":i -u The avrdude commands, which I am running in Terminal. I'm literally downloading the same zip file onto each OS version and running it. ![]() All "test files", including avrdude, the device hex file to upload, the ArduinoAsISP.hex file, etc. All hardware, including the computer, the Arduino, the cabling, etc. However, the procedure does NOT work in Mac OS 11.6 (I haven't tested in 10.15 or 12.x). The following procedure works without issue in Windows 7 & 10, as well as Mac OS 10.13 &10.14. I have the same issue as Error while burning boot loader (Atmega328p).
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |